November 11, 2026
How to prepare seed potatoes for planting
Prepare seed potatoes by sprouting them in light, cutting the large ones into egg-sized pieces, letting the cuts dry, and planting into soil that crumbles in your hand. Plant early enough that the shoots have time to push up through the soil, and late enough that they break the surface after your yard's last frost. Each set of shoots draws on the starch stored in the seed piece. A frost that kills the first set forces the plant to spend more of that starch on a second.
We grow potatoes in our ground bed. In 2026 we planted on April 1 and dug 14.9 lb between July 9 and July 18. These are the steps we follow, in order.
Step 1. Buy certified seed potatoes
Certified seed potatoes are grown and inspected to keep virus and blight out of the stock. Grocery potatoes often carry a sprout inhibitor, so they sprout late or unevenly. They can also bring diseases that live on in your soil for years. Buy in late winter so you have time to sprout them.
Step 2. Sprout them in light
Sprouting, also called chitting, wakes the tuber from dormancy before it goes in the ground. Stand each potato in an egg carton or tray with the end holding the most eyes facing up. Keep them somewhere cool and bright, safe from frost. Light keeps the sprouts short, green and tough. In a dark cupboard the sprouts grow long and pale, and they snap off when you plant. Start a few weeks before your planting date. The tubers are ready when the sprouts are stubby and firm.
Step 3. Cut the large tubers
Plant small tubers whole. Cut larger ones into pieces about the size of a hen's egg, with eyes or sprouts on every piece. The piece feeds the shoot until the plant has roots and leaves of its own, so a sliver starves it. Use a clean knife and wipe it between tubers, because a blade carries rot from one potato to the next.
Step 4. Let the cuts dry
Spread the cut pieces in a dry, airy spot for a few days. The cut face forms a corky skin that seals the wound. That skin keeps rot organisms out and slows water loss once the piece is buried. An uncured piece in cold, wet soil is the one most likely to turn to mush. Whole tubers skip this step.
Step 5. Check the soil
Squeeze a handful of soil from planting depth. If it crumbles when you poke it, the bed is ready. If it holds a shiny ball or smears, wait. Water in saturated soil fills the pores where air should be, and a seed piece needs oxygen to sprout. Cold soil slows sprouting, so the piece sits longer in the ground with rot organisms around it.
A frost alert reads the air forecast. The squeeze test is your only check on whether the soil around a seed piece is cold or wet enough to rot it.
Step 6. Set the date by your real last frost
Shoots take a while to climb from planting depth to the surface. That delay lets you plant before the last frost and still have the leaves appear after it. The published frost date describes a region. Your yard can run colder, because cold air is denser and drains into low spots on still, clear nights.
Our published last frost is April 28. Our station learned that our yard runs 7°F colder than the forecast, which moves our effective last frost to May 20. We recorded our last spring frost of 2026 on April 30. We planted on April 1, so any shoot that surfaced in late April or before May 20 came up inside our own frost window.
To see how your area compares with the forecast, try the microclimate checker. It compares nearby home weather stations with the forecast model over recent nights and returns a range for your area. We explain why the printed date misleads in your last frost date is probably wrong.
Step 7. Plant and hill
Lay the pieces in a trench with the sprouts facing up and cover them. Plant deep enough that the shoots push through a layer of soil before they reach the air. As the shoots come up, draw soil over them and around the stems. Soil stores the day's heat and gives it back at night, which shields young leaves from a light frost. Hilling also keeps new tubers in the dark. Light turns their skins green and builds up solanine, a bitter and toxic compound.
A raised bed drains faster and warms sooner in spring, so it is often ready earlier. Our guide to potatoes in raised beds covers watering and timing there.
What can go wrong
- Seed pieces rot. Cold, soggy soil and uncured cuts cause most rot. If nothing shows after several weeks, dig one up, and replant in drier ground if it is soft and foul.
- Frost burns the first shoots. The leaves blacken and collapse. The plant sends up new shoots from buried buds, but it spends stored starch to do it and the harvest can shrink.
- Sprouts snap off. Long, pale sprouts from a dark store break at planting. The tuber sprouts again from its remaining eyes and loses its head start.
- Voles eat the crop from below. On July 17 a vole ate every tuber under one plant in our ground bed, and the plant came up green and healthy with its roots stripped. Voles tunnel through loose, hilled soil, so a plant that lifts too easily is worth digging under.
For the frost risk, an alert the evening before gives you time to hill soil over the shoots or lay a cover on them. Frost alerts run for every garden. At 17:00 local time Siltwell checks the forecast lows for tomorrow and the day after against your frost threshold, which defaults to 0 °C (32°F). If your site runs colder than the forecast, you can enter the offset yourself under Settings, Garden, Edit garden, Microclimate offset, using a negative number for a colder site. For how cold the leaves can get before they die, see the frost kill temperature for potato plants.
Start with the calendar. Find your yard's last frost, count back the few weeks your shoots need to surface, and set the seed potatoes out to sprout a few weeks before that planting day.
Common questions.
- How do you prepare seed potatoes for planting?
- Sprout them in a cool, bright spot for a few weeks, cut large tubers into egg-sized pieces with eyes on each, and let the cuts dry for a few days. Then plant them into soil that crumbles when you squeeze it. Light keeps the sprouts short and tough, and the dried cut face seals out rot.
- Should I cut seed potatoes before planting?
- Cut them only when they are larger than a hen's egg. Each piece needs eyes, and it needs enough flesh to feed the shoot until the plant has roots and leaves of its own. Let the cut faces dry for a few days so a corky skin seals the wound. Small tubers go in whole and skip that risk.
- When should seed potatoes be planted?
- Plant when the soil crumbles in your hand and the shoots will reach the surface after your yard's last frost. Shoots take a while to climb up from planting depth, so planting can come before the frost date itself. Use your yard's frost date, which can fall later than the published one. Ours moves from April 28 to May 20 once our station's offset is applied.
- Can you plant grocery store potatoes as seed potatoes?
- You can, but they often sprout late or unevenly because many are treated with a sprout inhibitor. Nobody inspects them for disease, and blight or virus they carry can stay in your soil. Certified seed potatoes avoid both problems.
Related guides
Planting tobacco from seed by your real last frost
How to start tobacco from dust-fine seed indoors, harden it off, and set it out after the last frost your own yard gets.
Onion sets for planting, compared with seed and transplants
Onion sets, seed and transplants compared on speed, bulbs and bolting risk, and how your yard's real spring lows change which one to plant.
Planting potatoes in winter without losing them to frost
How your yard's soil temperature and real frost dates decide when planting potatoes in winter works, and how to plant deep so the shoots dodge frost.
Free planting tools
- When to plant shows the last date to sow each crop before your fall frost.
- Microclimate checker shows how much colder or warmer gardens near you ran than the forecast low.
- GDD estimator adds up a typical season's heat and shows which crops can ripen where you are.
